Cancel a delay start or a washing
program in progress
●
Simultaneously press and hold the
two program buttons positioned
over the word
Cancel
, until only
the POWER light is on. The
washing program has been
cancelled.
If a new washing program is to be
selected, check that there is
detergent in the detergent
dispenser.
End of the washing program
●
The dishwasher will automatically
stop.
●
The light of the program just ended
will remain on.
●
Zero appears in the digital display.
1. Switch off the dishwasher by
pressing the POWER button.
2. Open the dishwasher’s door, leave
it ajar and wait a few minutes
before removing the dishes; in this
way they will be cooler and the
drying will be improved.
The dishwasher drying system is
provided with a device that allows air
to circulate inside the dishwasher to
prevent residual steam recondensing
on the dishes as water droplets.
Once the washing program has ended
this device operates intermittently
for another 20 minutes, as long as
the dishwasher is switched on.
If the On/Off button is pressed or the
door is opened during these 20
minutes, the device will be
automatically cancelled.
Unloading the dishwasher
●
Hot dishes are sensitive to knocks.
Dishes should therefore be allowed
to cool down before removing from
the appliance.
●
Empty the lower basket first and
then the upper one; this will avoid
water dripping from the upper
basket onto the dishes in the lower
one.
●
Water may appear on the sides
and the door of the dishwasher as
the stainless steel will eventually
become cooler than the dishes.
daily use 19
117994710 10042007.qxp 4/10/2007 3:04 PM Pagina 19