55
English
No Picture when I connect VGA cable or "No Input Signal"
•
Check VGA cable connection.
•
Lower the video resolution on the computer and try again.
Picture is cut off/with sidebar screen.
•
Use "Auto Adjust".
•
Make sure the aspect ratio is set correctly.
Blocky images appear in TV mode.
•
Check your antenna connection. If necessary, rotate the antenna and wait up to
10 seconds for signal.
•
Reduce signal splitters and excessively long cables.
•
Replace poor antenna cables and/or connectors to improve signal quality.
Wrong or Abnormal Colors
•
If any colors (red, green or blue) are missing, check the video cable to make
sure it's securely connected. Loose or broken pins in the cable connector could
cause an improper connection.
•
Connect the High Definition LCD TV to another computer.
Snow Appears on Screen
•
Check your antenna connection. If necessary, rotate the antenna and wait up to
10 seconds for signal.
•
Check the TV/CATV selection.
•
Make sure the external device is HDCP compliant.
There's No Sound
•
Check the audio connection.
•
If MUTE appears on the screen, press the "MUTE" button on the remote control
to turn the function off.
•
Check the audio settings to see if the HDTV audio is set to SAP or minimum.
•
Press the (Up) key on the remote control.
Parental Control Password is "LOST"
•
While rare, if this should happen, select "PASSWORD EDIT" and enter "0000"
to reset the password.
Where Can I Find More Help?
•
Log on to: www.westinghousedigital.com
•
Contact Westinghouse Customer Service at (866) 287-5555 or write us at
[email protected]
