13
Hex nut assembly,
fully screwed down
Insert oriented for
natural gas operation
Hex nut assembly,
removed from
regulator and insert
disassembled
Insert oriented for
LPG operation
ELECTRiCAL CONNECTiON (220-240 volts)
The appliance is supplied with a standard 7.5Amp
service cord terminated by a 3-pin plug for connection
to a standard household socket. The electrical supply
is required to power the electronic ignition system.
NOTE:
It will be necessary for servicing purposes to
disconnect the electrical power supply. The power point
should therefore be accessible after the appliance is
installed, as specified in the local wiring regulations.
Diagram 1 is a schematic of the wiring in the appliance.
The weight of the unit is printed on the appliance
packaging label.
Diagram 1
E
N
L
Use of Hose Assemblies
Ensure that the hose assembly is restrained from accidental
contact with the flue outlet of an underbench oven or any
other hot surface of an adjacent appliance.
Figure 10
