6
7
OPERATION
DESCRIPTION
DESCRIPTION OF YOUR APPLIANCE
BEFORE OPERATING YOUR APPLIANCE
FOR THE FIRST TIME
TIPS & INFORMATION
SETTING THE TIME
If you have purchased a model fitted with a 3 button
programmable timer, you MusT set the time of day before
you can operate your appliance.
ELECTRONIC CLOCK
• After the appliance has been electrically connected
“12.00” will be displayed and the “clock” indicator
will flash.
• To set the time of day, press – or +. 5 seconds after
the last change, the “clock” indicator will disappear,
confirming the time has been set.
•
Note: the clock has a 24-hour display.
PREPARING YOUR APPLIANCE FOR THE FIRST TIME
• Please remove all internal boxes and bags from
the oven & remove visible labels from surfaces
before operation.
• Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the
oven is completely dry.
• New appliances can have an odour during first
operation. It is recommended to ‘run in’ your oven
before you cook for the first time. Run the oven at
180ºC for 2-4 hours and ensure that the room is
well ventilated.
• DO NOT line the oven with foil, it will damage
the enamel.
• If your appliance is fitted with a 2-hour “Auto Off”
timer, make sure it is set to the ‘O’ marker for
manual operation.
• If your appliance is fitted with solid hotplates,
turn heat setting to high for 3 minutes to fully harden
the coating. When cooled, apply a thin coating of
cooking oil to seal the surface.
FITTING OVEN SHELVES
• ensure shelf orientation is correct (refer picture).
• slide into oven at an angle until raised back of shelf
is past the stop on side runners.
• Lower front of shelf and push in until stop is reached.
•
Note: the top ledge is not a shelf position.
NOTE the orientation of the
side and rear features.
GEK1235W
GEK1385W
1.
Hotplate Burner Control Knob
• sets the hotplate cooking temperature.
(see pg 16 for more information).
2. Grill Burner Control Knob
• sets the grilling temperature.
(see pg 14 for more information).
3. Oven Burner Control Knob
• sets the baking temperature.
(see pg 10 for more information).
Note: Diagram depicts right hand version.
4. Electronic Igniter Switch
• Ignites the hotplate burners, grill burner and
oven burner.
Note: the appropriate burner control knob
has to be set first.
5. Fan Switch
• Turns oven fan on/off.
6. Light Switch
• Turns oven light on/off.
7. 60 Minute Ringer Timer
• sets reminder time.
(see pg 17 for more information).
8. Manual Grill Igniter Button
• Ignites the grill burner.
Note: the grill burner control knob has to be set to
“High” first. (see pg 14 for more information).
9. Manual Oven Igniter Button
• Ignites the oven burner.
Note: the oven burner control knob has to be held
down first (see pg 11 for more information).
