18
19
OPERATION
USAGE
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. select the desired oven function temperature. The oven
indicator light will glow and the heating source will
come on.
3. Press the “mode“ button until the “end time” indicator
begins flashing.
4. enter the time of day you want to finish cooking by
pressing the – or + buttons. 5 seconds after the last
change, the “end time” indicator will stop flashing
and the current time of day will be displayed.
Setting the delayed start cooking time
1. Program the “cook time” and “end time” as described
in the relevant sections. Once both the “cook time” and
“end time” have been set, the “cook time” and “end
time” indicators will stop flashing and the current time
of day will be displayed.
To check or cancel settings
1. To check your settings, press the mode button until
the setting you want is displayed. A red light will
flash next to the mode (cook time, end time etc)
that is currently on display.
2. To cancel “delayed start” press the mode button until
a light flashes next to “end time”. Press and hold the –
button until the clock no longer reverses (you will hear
a beep). If you have left the temperature knob at a
setting the oven will start once the “end time” light
stops flashing.
3. To cancel “auto shut off” press the mode button until
a light flashes next to “cook time”. Press and hold the
– button until the clock no longer reverses at (“0:00”
and you will hear a beep). This automatically cancels
“delayed start”. If you have left the temperature knob at
a setting, the oven will start once the “cook time” light
stops flashing. Because you have cancelled “auto off” the
oven will continue to heat until you manually turn it off.
On completion of cooking
The heat source will turn off, the timer will beep and
the “end time” and/or “cook time” indicators will flash.
1. Turn the temperature control to the off position.
2. Press any button to stop the timer from beeping.
WARNING
Safety Warnings about cleaning
• ALWAYs make sure that the cooker is turned off
before cleaning.
• ALWAYs clean cooker immediately after use.
• DO NOT use steam cleaners. These may cause
moisture build-up.
• DO NOT use caustic based cleaners. These will
damage aluminium parts.
Cleaning the enamel
• Keep enamel clean by wiping it with a soft cloth
dipped in warm soapy water.
• Rub difficult stains with a nylon scourer or
creamed cleanser.
• DO NOT use abrasive cleaners, powder cleaners,
steel wool or wax polishes.
• If you use an oven cleaner, follow the instructions
on the product carefully.
Cleaning the control panel
• Make sure control knobs are in Off position.
• Remove knobs from control panel by pulling towards you.
• DO NOT use too much water when cleaning control panel.
CLEANING THE GAS COOKTOP
1. Remove the trivets (see diagram below) by lifting
them from hob.
2. Remove the burner caps and crowns (see diagram below).
3. Wash hob with warm soapy water.
4. If crowns and caps are heavily soiled use a non-
abrasive cleaning compound.
WARNING
DO NOT use abrasive or caustic based cleaners.
DO NOT wash in a dishwasher.
DO NOT drop trivet onto hob. This may damage
the enamel surface.
OPERATING THE PROGRAMMABLE CLOCK
(continued)
CLEANING THE COOKER
Using the 60 minute ringer timer
To set the timer:
1. Turn the knob clockwise to the required number of
minutes. When the time has elapsed the timer will
give a short ring.
Note: For times below 20 minutes, turn the knob past
20 minutes and then back to the required number of minutes.
Using the 2 hour cut-off timer
Manual operation
The timer needs to be set at the “O” marker so that the oven
can be used manually.
Automatic operation
The 2 hour timer features an automatic oven “cut off”.
This means that a cooking period of up to 120 minutes
can be set.
1. set the Oven Temperature Control Knob to the
required temperature.
2. Turn the cut-off timer clockwise to the required number
of minutes. for timer settings of less than 20 minutes,
turn the knob past 20 minutes and then back to the
required number of minutes. (Purpose – to set audible
ringer.)
3. When the timer returns to “Auto Off”, the timer gives
a short ring and the oven will be switched off.
4. The oven will not operate again until you turn the timer
back to the “O” marker.
Note: It is not recommended to use this timer for short
duration, e.g. boiling eggs.
TIMER
OVEN TIMER
WARNING
• The Clock MusT be set to operate oven.
General features
Your 3 button programmable timer has the following features:
• Timer – your 3 button programmable timer allows you
to set a countdown time that will beep when the set
time has elapsed.
• Cooking duration – You can set a cooking duration.
A timer will count down the preset cooking time, beep
when the time has elapsed and turn the oven off.
• end cooking time – you can set a cooking finish time.
A timer will count down the preset cooking time, beep
when the finish time has been reached and turn the
oven off.
• Delayed start cooking time – You can combine the
cooking duration and cooking end time to switch the
oven on and off at a specific time during the day.
Note: Your 3 button programmable timer only operates
with your oven.
Change the time of day (Daylight saving)
1. Press the “mode” button until the “clock” indicator
begins flashing.
2. Press the – or + buttons to change the time. 5 seconds
after the last change, the “clock” indicator will
disappear, confirming the time has been set.
Setting the timer
1. Press the “mode“ button until the “timer” indicator
begins flashing.
2. set the countdown time you want by using the – and +
buttons. 5 seconds after the last change the “timer” indicator
will stop flashing, confirming the timer has been set.
3. To stop the beeper, press any button.
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. set the oven to the desired temperature. The oven
indicator light will glow and the oven will come on.
3. Press the “mode“ button until the “cook time” indicator
begins flashing.
4. set the cooking duration you want by using the – or
+ buttons. 5 seconds after the last change, the “cook
time” indicator will stop flashing, and the time of day
will be displayed.
Note: Do not forget to add preheating time if necessary.
USING THE TIMER AND CLOCK
OPERATING THE PROGRAMMABLE CLOCK
