Westinghouse AC System, Installation Manual

Page: 32 / 54

Westinghouse Solar AC Installation Guide
Copyright © 2011 - Westinghouse Solar 28 | P a g e
Step 5 -
Assemble the north/ South Bracket to the second row of L brackets using the 3/8"
hardware. The feeler prongs are inserted into the lower modules Groove to properly align the
bracket.
Step 6 -
North-South brackets are secured to the L Bracket at the top of the lower row using 3/8"
Flange nuts. North/ South Brackets are installed at all inter row L Bracket locations in preparation
for the second row of modules.
Tip: If a module is left out of the array to make room for a roof vent, an additional North /South
bracket may be required to support the second row and maintain Westinghouse Solar structural
requirements.
Step 7 - Lower the first module of the upper row into place until the module surface is level with
the lower row. Rest the module on the two North/ South Bracket fingers to hold the module in
place while 3/8" hardware is installed in the modules Groove closest to the roofs peak.