ESF-WH-070
2
3) Do not use an LED driver with this product.
4) NOT FOR USE WITH EMERGENCY LIGHTING.
1) Product should be installed by a qualified electrician.
2)
Switch off the power supply before commencing work, make sure all connections are secure before you power on.
For your and others safety please read the precaution carefully before installation:
Widely used in residential buildings, offices, shopping malls, supermarkets, hosptials, assembly lines, warehouses, etc. for
energy saving illumination.
1.Product Features:
2.Product Applications:
Full glass housing: No Aging, Yellowing, Bending
Designed to work without a ballast
UL certified
3.Installation Instructions:
Please follow all this instructions and notes, to ensure the product is installed and used in a safe manner.
Safety Precautions:
WARNING:
WARNING - Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of
luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified
electrician.
WARNING - Install this kit only in the luminaires that have the construction features and
dimensions shown in the photographs and/or drawings and where the input rating of the
retrofit kit does not exceed the input rating of the luminaire.
WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects.
THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILI-
TY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION.
Do not make or alter any open holes in an enclosure of wiring or electrical components
during kit installation.
Installers should not disconnect existing wires from lampholder terminals to make new
connections at lampholder terminals. Instead installers should cut existing lampholder
leads away from the lampholder and make new electrical connections to lampholder lead
wires by employing applicable connectors.
