5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-2853473-RevA
ECO #: W18-0126
DATE: 10/16/18
6. At the front passenger mounting location, loosely install Mounting Bracket B (9) with preassembled Mounting Bracket
Base (13).
Note
: Installation is similar to Mounting Bracket A.
7. Repeat
Steps 4-7
on the driver side of the vehicle.
Note:
Driver Front will receive Mounting Bracket A (8) rather than B.
8. Moving to the rear-most location, install the Top Isolator Bracket (10), Top Isolator Brace (11), and Bottom Isolator
Bracket along with the Isolator Kit (14). See
Figures 8 & 9.
You will need to first remove the bolt in the bed as shown in
Figure 7.
Note:
A breaker-bar or impact gun will help in removal. The bolt is very tight.
Fig. 7
Fig. 9
Top Isolator Brace
Factory Hardware
Fig. 8
Top Isolator Bracket
Driver Side Shown
