3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-2853473-RevA
ECO #: W18-0126
DATE: 10/16/18
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
2. Preassemble the Mounting Brackets and Link Brackets (4,8,9). Do not tighten hardware at this time. See
Figure 1
.
Fig. 1
Similar Bracket
24
13
8
22
21
23
3. Starting on the passenger side of the vehicle, locate the 3
mounting locations on the rocker panel.
Note A:
The rear mounting location is shown in
Figure 2
. Other
mounting locations are similar.
Note B:
The lower two studs on the rocker panel have a thick
coat of paint on them. When installing the M8 hex nuts,
apply extra pressure to start. If necessary, back M8 hex
nuts off the studs to clear build up.
See
Figure 2
.
See Figure 18 and 19 on page 8 and 9 for bracket loca-
tions diagrams.
Fig. 2
Rear Mounting Location Shown
Other Mounting Locations are Similar
