2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service (800) 793-7846
www.westinautomotive.com
P.N.: 75-5653418-RevA
ECO #: W17-0072
DATE: 11/20/17
2. Start installation on either side of the vehicle. Locate mounting locations with factory threaded holes with caps covering
them. Remove factory caps from threaded holes, they will not be used again. Locate (1) Front Mounting Bracket and
loosely install it to the front mounting location on the rocker panel using (2) Long M8 hex head cap screw, (2) M8 split
lock washer, and (2) M8 flat washer (Items 4-6). Locate the Mounting Bracket B (Item 3) and loosely secure in the correct
mounting locations on the rocker panel. Loosely install using the provided M8 hardware (Items 5-7).
See Figure. 1 and 2.
3. Repeat Step 2 for the other vehicle side.
4. On driver side of the truck underneath the bed, locate a part of the frame that protrudes outward and has a large slot on its
face. This is where you slide the M12 Nut Plate (item 18) and loosely install the Top Isolator Bracket (Item 16) with the
supplied M12 hardware. See
Figure 3
5. Locate (1) isolator kit (Item 17) and (1) isolator bracket (14/15) and loosely secure each other with the previously installed
top isolator bracket. See
Figure 4
. (
Note:
See br acket or ientation pg.3)
Figure 1
Figure 2
Figure 3
Figure 4
