2
Westin Automotive Products, Inc.
320 Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service (800) 793-7846
www.westinautomotive.com
P.N.: 75-3069 REV A
ECO #: W14-0042
DATE: 7/20/2015
INSTALLATION COMPLETE
Location where to drill
Passenger side shown
Drill 1/2” hole
Figure 2
Location of where to screw
Driver side shown
M12
M10
Figure 1
Insert M10 bolt plate
CARE INSTRUCTIONS
GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER
6. With assistance, align and adjust the receiver hitch assembly as necessary with the intended holes.
See Figure 1 & 2.
Loosely
secure the receiver hitch assembly to the frame using the supplied M10 and M12 hardware. Refer to
Hitch Assembly
on page 1
for correct placement.
7. Align and adjust the receiver hitch assembly as necessary. Tighten and torque all M10 hardware to 55-60 ft-lbs and M12 hard-
ware to 65-70 ft-lbs.
