11
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-598202-RevB
ECO #: W18-0140
DATE: 10/03/18
10. Bearing Installation
NOTE: BEARINGS MUST BE PACKED WITH GREASE FOR PROPER FUNCTION AND LONGEVITY
A. Obtain the Bearing Kit (3).
B. Identify the large bearing, race, and seal.
C. Turn the Tire Carrier over so that the bottom of the spindle tube is facing up.
D. Insert the bearing race into the tube with the tapered side facing up.
See Figure 11.
E. Place a generous amount of grease (not included) in the palm of your hand, and tap the bearing repeatedly in the
grease until grease is spread throughout the rollers in the bearing.
F. Place the bearing into the race as oriented in
Figure 11.
G. Place the large bearing washer on top of the bearing.
See Figure 11.
H. Using a soft hammer, tap the seal into place until flush with the bottom of the spindle tube on the tire carrier.
See
Figure 11.
I. Repeat steps B-G for the small bearing with the tire carrier turned right side up.
Small Bearing Washer
Small Bearing Race
Small Bearing
Large Bearing
Large Bearing Race
Bearing Seal
Large Bearing Washer
Fig 11
Top of Spindle
Bottom of Spindle
Item 3
Item 2
