5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-5841215-RevA
ECO #: W19-0085
DATE: 09/23/19
TRIMMING NEEDED
Trimming of the factory Front Corner Pieces will be necessary to install the Pro Mod Front Bumper.
If you would not like to trim the stock Corner Pieces, OE replacement pieces to trim instead (PN Right-
84658018, PN Left-84658017) may be purchased separately and installed. ONLY ONE OPTION IS
NEEDED:YOU MAY EITHER TRIM THE OEM PIECE OR PURCHASE A REPLACEMENT TO
TRIM INSTEAD.
TRIMMING PROCEDURE
A. With the bumper now off, you will take the supplied templates and align them on the front corner pieces. Tape at the speci-
fied areas on the template.
See Figure 6
B. Make sure that the template is aligned with the curve and is level across the bottom to ensure a straight cut.
C. Using a cutting tool, trim the corner piece below the line as specified on the template.
See Figure 7
D. Repeat the process on the opposite side.
E. Reinstall the corner pieces.
Tape as shown
Fig. 6
Fig. 7
Cut evenly across
