4
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service (800) 793-7846
www.westinautomotive.com
P.N.: 75-57399-RevA
ECO #: W19-0195
DATE: 11/26/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
11. Locate the lower driver mounting and support brackets for the Grille Guard. Using the supplied M12 hardware, loosely
install the mounting brackets on to the frame. The mounting bracket and support bracket (5) sandwich the frame.
See Fig-
ure 9-10.
12. Repeat on the passenger side.
Fig. 10
9
11
4
2
Frame
8
12
10
Driver Side Shown
Fig. 9
Frame
Item 4
13.
Note: Cutting of lower valence is required.
Locate the upper support straps (6-7) for the grille guard. Loosely re-install
the front bumper with the upper support straps. Cut out the bumper plastic as necessary for the bracket clearance in the
specified area below (
Figure 12)
. Reconnect all electrical connections. The upper factory bumper bolts will be used for the
upper support straps. Measure the distance between the mounting surfaces of the upper straps and ensure it is about 42.25”.
Torque to 50-55 ft-lbs.
See Figure 11-13.
