4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-4624025-RevA
ECO #: W19-0076
DATE: 12/12/19
9.
Make sure the support straps are 43 inches apart to make sure that the grille guard can be installed.
See Figure 6
43in
7. Remove the top outside corner nut and bolt off of each bumper bracket.
See Figure 3
8.
If Installing the grille guard:
Install a plastic M12 retainer onto the factor y bolt once it passes thr ough the hole. In-
stall the strap on to the upper left hole of the bumper bracket. (Trq: 60 ft-lbs). Repeat on the passenger side.
See Figure 4
Fig. 4
11
Fig. 5
Driver Side Shown
Bumper Bracket
Front
Install retainer square here
when the bolt pokes through
Use factory bolt
ONLY FOR INSTALLATION OF GRILLE GUARD IF ONLY INSTALLING WINCH
TRAY SKIP THIS PAGE AND PROCEED TO PAGE 5.
Fig. 6