3
Westin Automotive Products, Inc.
320 Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service (800) 793-7846
www.westinautomotive.com
P.N.: 75-0676 RevA
ECO #: W13-0110
DATE: 3/11/14
Attach the tray to the
Inner Brackets using
M12 hardware.
Fig. 5
12. If installing a Winch Tray Mount Grille Guard remove the vehicle’s radiator cover and grille as shown in Figures 6 & 7.
13. Remove the factory M12 bumper bolts from each side as shown in Figure 8.
14. Install the Support Straps by re-using the factory bumper bolts. Center the Support Straps and space them 42-3/4” apart
(outside edge to outside edge). Tighten and torque these fasteners to 50-55 ft-lbs. Refer to Figure 9.
Attach the tray to the Outer
Brackets using M10 hardware.
Pull up all fasteners and re-
move plastic radiator cover.
Fig. 6
Fig. 7
Remove all of the screws holding the grille to the upper radiator
support and carefully pull it from the vehicle. Note: there are
several inaccessible clips that provide some retention on the
grille. They will pop loose when you pull on the grille.
Remove these bumper
bolts from both sides.
Fig. 8
Fig. 9
Install the Support Straps. Center them,
space them to 42-3/4” and tighten them
before re-installing the grille.
42-3/4”
6, 7
7, 8, 9
11, 12, 13
10, 11
