4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-2851315-RevA
ECO #: W19-0070
DATE: 10/8/2019
4. Mount the center brackets in the same orientation as the rear brackets.
6. Repeat
Steps 2-4
on the passenger side. See
Figure 3
for visual bracket orientation.
7. Locate (1) driver side step board and (6) M8 square head bolts . Slide the M8 square head bolts through the slots under-
neath the step board and align with the previously installed mount brackets. Repeat for passenger side. See
Figure 4.
8. Loosely secure the step board onto each mount bracket using (2) M8 hex nuts, (2) M8 split lock washers, and (2) M8 flat
washers. See
Figure 5.
Driver Side shown
Figure 3
Front
2
8
4
10
6
Figure 4
18
21
20
Insert M8 square head bolt through
slot in step board and slide along
to align with mount bracket slots.
Front driver side shown
Figure 5
9. Align step bar and brackets to desired positioning then torque and tighten all M8 hardware to 16 ft-lbs.
10
