background image

 

 

 

 

 

 

4   

Westin Automotive Products, Inc. 

320 W. Covina Blvd 

San Dimas, Ca. 91773 

Thank you for choosing Westin products 

for additional installation assistance please call 

Customer Service (800) 793-7846 

www.westinautomotive.com 

P.N.: 75-212329-RevD 

ECO #: W16-0082 

DATE: 2/16/17 

Failure to follow these instructions could lead to death, personal injury, and / or property damage. 

 

 

FASTENERS: 
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined.    DOUBLE CHECK ALL FASTENERS 
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION 
AND SAFETY. 
 
DRILLING: 
Most Westin products do not require drilling for installation.  If drilling is defined as required, use 
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN 
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE. 
 
EYE PROTECTION: 
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO 
AVOID PERSONAL INJURY. 

 

MAXIMUM TOWING/CARRYING CAPACITY: 
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product. 
User should never exceed the vehicle manufacturers maximum tow and weight rating regardless 
of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN 
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS 
VEHICLE DAMAGE. 

WARNING

 

AUTOMOTIVE PRODUCTS, INC.  

 

Summary of Contents for 21-23290

Page 1: ...13MM WRENCH 8 2 REAR SUPPORT BRACKET POWER DRILL 9 18 M8 HEX CAP SCREW BLACK ZINC 5 16 3 8 DRILL BIT 10 36 M8 FLAT WASHER BLACK ZINC RATCHET 11 18 M8 SPLIT LOCK WASHER BLACK ZINC TORQUE WRENCH 12 18 M8 HEX NUT BLACK ZINC 13 12 M10 HEX SOCKET BUTTON HEAD SCREW BLACK ZINC 14 18 M10 FLAT WASHER BLACK ZINC 15 12 M10 INTERNAL TOOTHED LOCK WASHER BLACK ZINC 16 6 M10 HEX CAP SCREW BLACK ZINC 17 6 M10 SPL...

Page 2: ...icle un derbody using 1 M10 hex cap screw 1 M10 split lock washer and 1 M10 flat washer See Figure 2 4 Attach the driver side front support bracket to the pinch weld of the vehicle using 2 M8 hex cap screws 4 M8 flat washers 2 M8 split lock washers and 2 M8 hex nuts One more holes located on the pinch weld may have to be enlarged using a 5 16 3 8 drill bit See Figure 2 5 Secure the support bracket...

Page 3: ...ATCHES GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER 7 At this time attach the driver side step bar to the driver side mounting brackets using 6 M10 hex socket but ton head screws 6 M10 internal toothed lock wash ers and 6 M10 flat washers See Figure 4 8 Align all mounting brackets and step bar as desired Tighten all M8 fasteners to 15 18 ft lbs M10 hex cap screws to 30 ft lbs an...

Page 4: ...FUNCTION AND SAFETY DRILLING Most Westin products do not require drilling for installation If drilling is defined as required use caution when drilling a vehicle FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN PERSONAL INJURY AND OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE EYE PROTECTION ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO AVOID PERSONAL INJURY MAXIMUM ...

Reviews: