ASSEMBLY INSTRUCTIONS
* Please keep this owner's manual for future reference.
*If you have opened the carton and removed all packages, please disregard the STEP 1. See the STEP 2 directly.
STEP 1
Unpack and identify all parts using the parts list provided.
STEP 2
1)
Check each part before using the product. Make sure the gas supply system is
turned "OFF" before assembling.
See Figure 1
2)
Locate the battery, remove the plastic cover first. Unscrew the rubber cap of the
Electric Ignitor, place a AAA battery into the battery case. Make sure the positive
pole ("+") is towards the cap. Screw the cap back to the battery case tightly.
See
Figure 2
3)
Place the lava rocks evenly in the fire bowl on the top of the firebowl.
See
Figure 3
4) Open the storing door on the firebowl for the gas tank.
5) Put the gas tank in the metal stand. Make sure the gas tank sits on the metal
stand completely. Turn the wing screw on the outer part of metal stand clockwise
to secure the gas tank tightly.
See Figure 4.5
See "LP (Liquid Propane) gas supply
connection" for tank connection
WARNING
** DO NOT COVER THE IGNITION SCREEN when placing the
lava rocks into the fire bowl. Always keep Ignition Screen visible.
This screen must be clear and free of obstructions at all times to insure
proper operation.
The burner of the firebowl must be
covered by lava rocks completely.
Otherwise the flame may be extinguished
occasionally. See the Figure CORRECT
and INCORRECT for reference.
CORRECT
INCORRECT
