25
Operation
Intended Use
The unit is exclusively intended to dehumidify living rooms, basements or
storage areas with an ambient temperature of 5° C to 32° C. The unit may
only be used indoors. The unit is intended solely for private use and not
for commercial continuous operation. Usage other than as described
above is impermissible and may result in injury and/or damage to the unit.
Before first Use
1. Unpack the unit and check it for any damage in transit. Dispose of
packaging materials or store it out of reach of children. Plastic bags etc.
may become a deadly toy for children. Before first use, clean the hous-
ing as described in chapter
“Cleaning and Storing”.
2. Remove all packaging materials
and all carriage braces from the
unit. Remove the film from the
control panel (5).
3.
Place the unit on a flat, dry and
solid surface. Observe the dis-
tances to walls and other objects
in the room (e. g. heating system).
4. Allow the unit to remain in the
deployment position for approx.
30 minutes so that the coolant can pool.
Preparation
1. Inside the water tank you will find the float.
Check that the float in the water tank is able to
move freely. Make sure the water tank is insert-
ed correctly into the unit. Otherwise the conden-
sation water cannot be collected and the unit
will not function. The water tank has to be in-
serted up to the edge into the unit.
50 cm
50 cm
20 cm
20 cm
50 cm
