
Safety Notes
8
bag during sanding. Wear safety goggles. Wear hearing
protection.
Immediately switch off the machine when:
- Excessive sparking of the carbon brushes and verticiliosis in the
collector,
- Interruption of the mains plug, mains lead or mains lead damage.
- Defective switch,
- Smoke or stench of scorched isolation.
Do not disassemble the unit or attempt to repair it yourself. It
does not contain parts serviceable by you. In the case of
questions or problems, turn to our customer support.
ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
Battery
Never attempt to remove the battery for any reason.
Do not expose the battery to water.
Do not expose the battery to heat.
Do not store in locations where the temperature may exceed
40° C.
Charge only at ambient temperatures between 10° C and 40° C.
Charge only using the charger provided with the appliance/tool.
When disposing of batteries, follow the instructions given in the
section "Disposal".
Do not damage/deform the battery pack either by puncture or
impact, as this may create a risk of injury and fire.
Treat the unit carefully.
Take special care of the battery. Avoid dropping it onto any hard
surface and do not subject it to pressure or any other form of
mechanical stress. Keep the battery away from extreme heat and
cold.
Summary of Contents for MS 7.2 Li
