7
Operation
Use
1. Connect the power plug to a grounded mains socket. The indicator light (3)
turns on and the water will be heated.
2. Wait until the light turns off, then the steam brush has reached maximum
temperature. The steam brush is ready for use. The steam brush can be used
vertically or horizontally.
3. Press the steam button (6) lightly and regularly and permanent steam will
burst out, if you press short and powerful strong steam will burst out.
4. If the indicator light turns on, wait for some minutes until the lamp turns off
and then press the steam button (6) again.
In order to avoid condensation, do not press the steam button (6) while the
indicator light is on. No steam but water drops will leak from the vents!
5. Always make sure that there is enough water in the water tank (2). Always
unplug the steam brush before filling water again.
6. After use pull the power plug and drain remaining water from the water tank
by turning and shaking it upside down.
Cleaning and Storing
Use only a lightly moistened cloth to clean the housing. Do not use metal or
sharp items in order not to damage the surfaces. Do not use aggressive
chemicals or similar materials.
Let the steam brush cool down completely before storing.
Clean dirt on the brush B (10) with the included small brush.
If the steam volume is not sufficient, decalcify the steam brush from time to
time. Do not use vinegar, but rather a customary decalcifying agent based on
citric acid. Follow the instructions from the manufacturer of the decalcifying
agent.
