14
Operation
Intended Use
The air impact wrench with an appropriate tool has been exclusively
designed for loosening and tightening of screws, bolts and nuts, etc. in
the workshop, in agricultural vehicles, equipment and machinery.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or
any changes (reconstruction, no original accessory) can lead to serious
risks and is regarded as use that is contrary to the intended purpose.
The operator is liable for any damage caused by improper use.
Before first Use
Unpack the air impact wrench and check all parts for any damage in
transit. Dispose of packaging materials or store them out of reach of
children. There is risk of suffocation!
Installing/Exchanging Tools
The air impact wrench features a ½” square drive (1). That means you
can operate
it with tools that have a ½” shaft.
Please note! Before changing the socket, unplug the air impact wrench
from the compressed air connection to avoid unintentional start-up.
Only use impact-quality sockets and accessories with the air impact
wrench.
Firmly push the desired socket onto the square drive, so that it can not
loosen when working.
Operation
1.
The air impact wrench is equipped with an R ¼“ air inlet (4). For your
own safety it is not recommended to use a permanent connection be-
tween the air impact wrench and the air hose, but use the plug nipple
(5) instead.
2. Seal the end of the plug nipple with Teflon tape before you screw it
onto the air connection.
3. The air impact wrench has to be provided with lubricating oil during
operation. Before each use add oil through the opening of the com-
