43
Operation
Mounting the Telescopic Pole and the Handle
1. First mount the telescopic pole and the handle on the pole
saw.
Attention! For safety reasons the pole saw does not function
with the handle only. It is essential to mount the telescopic
pole!
2. Make sure the components are properly locked into each
other.
3. To unlock and remove the handle from
the telescopic pole, depress the PUSH
buttons on both sides of the handle (10)
and pull out the handle.
Adjusting the Working Length
1. To enlarge the telescopic pole, unscrew the lock nut a little bit.
2. Pull out the telescopic pole according to application and then
securely re-tighten the lock nut. The pole saw can be en-
larged up to a total length of 2.3 m. Thus, the working height
can reach up to 4 m.
PUSH