24
Operation
Extension Cord Clamp
While working with the pole saw the
power cord might be inadvertently
unplugged. To avoid unplugging, fasten
the power cord and the extension cord
together, as shown in the picture, by
using the included extension cord clamp.
Operation
1. Check the oil level and connect the power plug to power
mains.
2. To switch on the pole saw, first depress the safety switch (11)
and then press the trigger switch (10). Then, release the safety
switch.
3. To switch off the pole saw, release the trigger switch (10).
Please observe that the machine will still run for some sec-
onds. While cutting, make sure the oil level does not run out;
refill in time.
Adjusting the Telescopic Tube and the Shoulder Strap
1. To enlarge the telescopic tube, unscrew the lock nut (7) a little
bit.
2. Pull out the telescopic tube according to application and then
securely re-tighten the lock nut. The pole saw can be enlarged
up to a total length of 2.76 m.
3. To ensure well-balanced weight distribution, preferably use the
shoulder strap. Fasten the shoulder strap on the karabiner
hook and adjust the shoulder strap to the desired working
position.
