LED Snow Fall Light Chain with 5 Elements
– Article No. 88 70 44
6
Using
Installation and Using
1. Take the article out of the packaging.
2. Open the battery compartment by sliding the battery
compartment cover forward. Insert three new batteries
of the type LR6 (AA) into the battery compartment. Pay
attention to the proper polarity of the batteries. The po-
larity is printed inside the battery compartment. Close
the battery compartment with the lid.
3. Carefully display the light chain on the desired location.
4. Use the On/Off switch on the battery compartment to
switch the lights on respectively off.
5. Replace the batteries if the light of the LEDs gets weak-
er or if it does not shine at all anymore.
5 Elements with each 12 LED
30 cm Spacing
100 cm Lead Wire
3x LR6 (AA)
Water Resistant IP44 (Splash Resistant)
Batteries and rechargeable batteries
do not belong in household garbage.
For battery disposal, please check with
your local council.
