![background image](http://html.mh-extra.com/html/westfalia/87-74-50/87-74-50_instruction-manual_962914031.webp)
27
Operation
If, in spite of all safety precautions, kickback or pushback occurs,
the kickback brake activates and stops the saw chain immediately.
The kickback brake will be activated by a forceful contact with the
front hand guard. This strike occurs when the machine is kicked
upwards and the front hand pushes the hand guard.
Right Behaviour for Basic Cuts - Felling, Limbing and Cutting
1. Felling Trees
When felling trees make sure not to endanger any person, not to
strike any utility lines or cause any property damages.
When standing on an uphill terrain always stand on the uphill side
of the terrain as the tree is likely to roll or slide downhill.
Before felling a tree, plan an escape
path and clean the path if necessary.
The escape path should extend back
and diagonally to the rear of the
expected line of fall.
Before felling is started, consider the
natural lean of the tree, the location of
larger branches and the wind direction
to judge which way the tree will fall.
Remove dirt, stones, loose bark, nails,
stables and wire from the tree.
Making the Notching Undercut
Make a notch of 1/3 of the
diameter of the tree. Cut perpen-
dicular to the direction of falls.
First, make the lower horizontal
notching cut. This will help to
avoid pinching either the saw
chain or the sword when the
second notching cut in being
made.
Fall Direction
Summary of Contents for 87 74 50
Page 3: ...III ...