17
Operation
Before first Use
Remove the hedge trimmer and the accessory from the packaging.
Dispose of packaging materials out of reach of small children. There is
risk of suffocation!
1. Form a loop with the extension
cord and pass it through the
opening in the handle.
2. Hook the extension cord on the
cable run (4).
Adjusting the Working Position
1.
The motor housing can be rotated in both directions by 90° and snaps
into place in both directions at 45° and 90°.
In order to rotate the
motor housing, Push the release button (2) forward and either turn
it to the left or to the right until the housing locks audibly.
Please note that operating the hedge trimmer without locked motor
housing is not possible.
Operating
1. Connect the plug of the hedge trimmer with the extension cord and
a wall socket.
2. Remove the blade bar protection (7).
3. To switch on the hedge trimmer, first press the auxiliary safety
switch on the auxiliary handle (1) and then press the ON/OFF
switch on the handle (3). When working with the hedge trimmer
please always hold the unit firmly with both hands, one hand on the
handle (3) and the other hand on the auxiliary handle (1). For
switching off the unit, release the switches.
4. Before adjusting the angle of inclination first disconnect from power
mains.
Below you will find some hints on trimming hedges:
Cable Run
Power Cord
Extension Cord
