15
Operation
5.
When pressing the ON button
I
and turning the speed regulator
(4), you can adjust the running speed. Preferably start with set-
ting 1 and change the speed according to your requirements.
Hint: The speed regulator can only be used with the ON button
I
.
6.
After use, first remove the plug from the wall socket and then
detach the blender stick from the motor unit by pressing both
releasing buttons (7) simultaneously.
Operating the Beater
The beater (3) is also equipped witch 4 notches, so the locking pins
(7) on the motor unit will fit exactly into these notches. For locking
the beater make sure the locking pins (B) on the motor unit fit exact-
ly into these notches.
Hints:
When blending directly in the pan while cooking pay attention not
to overheat the blender.
When blending some hard foods like herbs, garlic, carrots, pota-
to etc. please add in the container a few water. Start blending
solid food in smaller quantities and add more food to achieve
good blending.
Do not immerse the blender stick for more than 15 cm into
liquids to avoid liquid to come in contact with the motor unit.
Do not operate the blender stick for more than 60 seconds con-
tinuously. Let the unit cool down before next use.
Cleaning
Before cleaning, please pull the power plug and allow the unit to
cool down!
Do not immerse the motor unit in water or any liquids!
Use only a moist cloth to clean the motor unit. Allow the unit to
dry fully before next use.
