background image

Safety Notes 

 

 

 

  Please read this manual carefully and use the unit only 

according to this manual. 

  Dispose of used packaging material carefully or store it out of 

the reach of children. There is a danger of suffocation! 

  Make sure the operating voltage stated on the type label 

corresponds to the power mains available in your area. 

  The unit is designed for operation in altitudes of up to 2000 m 

above sea level. 

  Check the belt and disc sander and the electrical connections 

for any damage and do not use the tool if the sander or the 
cable is damaged. 

  Persons with limited physical, sensorial or mental abilities are 

not allowed to use the unit, unless they are supervised and 
briefed for their safety by a qualified person. 

  Use the belt and disc sander according to this manual and 

only for the intended application. 

  Keep the belt and disc sander out of  reach of children or 

persons in need of supervision. 

  Before starting up, make sure that no spanners or adjusting 

keys are in the machine. 

  Avoid contact with grounded surfaces such as radiators, pipes 

etc. 

  Make sure that the belt and disc sander is switched off before 

plugging in. 

  Do not use the belt and disc sander when your reactivity is 

affected by alcohol consumption, medication, drugs, illness or 
tiredness. 

 

Please mind the following safety notes and also the 
included General Safety Notes to avoid malfunction, 
damages or physical injuries: 

Summary of Contents for 85 46 55







































Reviews: