19
Operation
Before first use charge the built-in lithium-ion battery of
the mini grinder for approx. 3
– 5 hours.
1.
Connect the power cord with
the charging station and a
wall socket.
2.
Insert the mini grinder into the
charging station,
only
as
shown in the picture on the
right. The charging control
LED (7) turns on.
First the red charging control
LED will flash to indicate that
the battery is charged. As soon as all three LEDs
(red, yellow and green) turn on, the built-in battery is
fully charged.
3.
Disconnect the charging station from power mains.
Turning ON and OFF
1.
Press the ON/OFF switch (9) to turn on the mini
grinder.
2.
Press the ON/OFF switch (9) again, to switch off the
mini grinder.
Adjusting the Speed
1.
Press the
+
button (8) to increase the speed of the
motor. The more you press the
+
button, the higher
the speed will be. The speed can be adjusted from
8.000
– 25.000 rpm. When increasing the speed, the