22
Operation
Monitor Power Connection
1. Make sure the monitor is fixed in place and cannot fall down.
Insert the 12 Volt DC plug of the power cable (5) into the
power jack at the right side of the monitor.
2. Plug the 12 Volt cigarette lighter adaptor into the vehicle’s
cigarette lighter socket.
3. Press the ON/OFF button (9) to turn the display ON. The blue
LED (13) will light up to indicate the monitor is ON. If no
adjustments are made, the monitor will turn to standby mode.
Monitor Controls
The monitor will automatically turn on when the radio signal
is active and the vehicle is in reverse gear.
ON/OFF Button (9)
Press the ON/OFF button to turn on the monitor. When pressing
the button again, the monitor will turn off.
Menu Button (7)
1. Press the Menu Button. The Display
shows:
BRIGHTNESS
CONTRAST
COLOR
DIRECTION
EXIT
2. Press the
button or the
button to adjust the settings.
