18
Operation
Cleaning and Maintenance
Before cleaning or maintaining, first disconnect the air hopper spray gun from
the air supply.
After use thoroughly rinse the spray gun and the hopper. When using water-
soluble coating material, simply clean all parts of the hopper spray gun
thoroughly with water.
Should it be necessary to disassemble the hopper spray for thoroughly
cleaning, observe the correct order of the components when assembling the
spray gun. Always be careful when disassembling and assembling the spray
gun.
Lubricate all moving parts of the hopper spray with suitable non-silicone
grease. All parts such as nozzles, seals, adjusters, etc. are wear parts and
must be exchanged with original spare parts in frequent use.
Use a moist cloth to clean the housing of the spray gun.
Do not allow liquids to enter the tool and never immerse it into liquids. Water in
the compressed air inlet can damage the machine. Therefore it is recom-
mended to drain the air line and the compressor in regular intervals! Also clean
the air filters in regular intervals.
Storing
Store the air hopper spray gun indoors in a dry place that is protected from
dust, dirt and extreme temperatures.
Store the spray gun out of reach of children.
