13
Using
7. Release the ON/OFF trigger to switch off the electric snow thrower.
Caution:
The how wheel continues to rotate for a few seconds after switching off.
Wait until it halted completely. Then pull the plug and move to the different
working area.
Usage Hints
1. Position the snow thrower so that the hob wheel
makes level contact with the ground. Hold the
snow thrower in an angle as pictured on the image
on the right and start-up the device.
2. Begin to push the snow thrower forward. If the
snow is completely cleared when pushing, it
indicates you are moving at the correct rate of
forward motion. The proper rate of speed depends
on the depth of the snow and on the consistency of
the snow. The snow thrower’s capacity for snow
removal is 10 cm for each round.
3. In deeper snow, push and pull the snow thrower
forward and backward in uniform movements.
4. Always move the snow thrower transverse to the direction of the path, in order
not to throw snow on the front sections of the path that you want to clear from
snow later.
5. The snow thrower clears the snow in 26 cm wide lanes. Move the snow
thrower in several parallel movements to clear wider passages from snow.
6. Observe the snow throwing destination. It does not make sense to throw the
snow to places that should be cleared later.
7. Do not work upwind. If possible, move in the same direction as the wind.
