VI
Christmas Tree Stand
Condition of Delivery
In condition of delivery the Christmas tree stand is closed and has a fixed foot
pedal.
Opening Christmas Trees Stand
Move the lever of the lever protection to upper
position to open the Christmas tree stand.
Releasing the Clamping Device
Use the tip of your foot to push the foot pedal up over
the pressure point. Keep your hands from the
clamping device because the clamps will spring open.
Inserting the Tree
Insert the Christmas tree centric, even and well balanced into the Christmas
tree stand.
Locking the Christmas Tree Stand
Operate the foot pedal as long until the 4 clamps secure the tree tightly. Then
carefully shake the tree to verify the secure locking of the tree and repeat
clamping procedure, if necessary.
Securing the Christmas Tree Stand
When the Christmas tree stand is secured, move the lever protection to the
lower position in order to secure the mechanism.
Now fill the water tank via the filling grid which is located at the topside. The
plastic water detector indicates the filling level.
The filling level must not exceed the “1/1” mark.
Water can leak when there is too much water in
the tank.
Maintenance and Care
Dry the Christmas tree stand after use. Slightly oil
or lubricate the metal parts.
Store the Christmas tree on a dry place that is protected from dust and dirt.
Regularly check all moving parts for mechanical strength and fractures in the
material.
