8
Assembly Instruction
Before first Use
Unpack the tile cutter with stand and check it for any damage in transit. Dispose
of packaging materials or store it out of reach of children. Plastic bags etc. may
become a deadly toy for children.
Intended Use
The tile cutter with stand is designed for cutting glazed tiles, interior tiles, polished
and vetrified tiles with a max. thickness of 20 mm.
Assembly
1. Turn the tile cutter aside. Unscrew all leg locking
screws (16) and fold the legs outwards.
2. Re-tighten the leg locking screws (16) by hand
only.
3. Connect the small breaking foot (6) with the
handle extension (3). Tighten the screw by hand
only.
4. The tile cutter with stand is ready assembled.
5. Retighten the set screws, as described on
page 6. Use suitable Allen keys. By doing
this the sliding block will run parallel in the
provided guide.
6. Make sure the tile cutter stand on an even
surface.
