Design protected by copyright
II
© Westfalia 12/07
With the voltage distributor you can have another 12 V socket, e.g. for the charger
of your mobile phone. The connector can be tilted in seven steps (angle 0 to
180°) and can be used with most vehicles. Please Notice! Don’t use with 24 V
power systems!
Installation
Insert the voltage distributor into the cigarette
lighter socket of your car. When the function
control LED on the distributor lights up, the
distributor is ready to use. If the led does not
light up, check the fuse (see Changing /
Checking the fuse).
Tilt the distributor to the desired position and
connect the desired consumers.
Changing / Checking the Fuse
Unscrew the front of the distributor (turn
counter clockwise) and remove the internal fuse.
Check the fuse. If it is defective, replace it with one of the same type (10 A).
Please Notice!
Do not expose to loads exceeding 10 A (or 120 W). If the starter battery is weak,
disconnect the distributor from the vehicle power system to disconnect
unnecessary consumers.
12 V On Board Voltage Distributor
Article No. 642579
Instruction Manual
2 Consumers max.
10 A total
Control LED
Fuse in the
Tip
