Design protected by copyright
© Westfalia 06/10
Article No. 64 77 27
The glass wizard is perfectly suited for cleaning contaminations like dirt and
smear and the likes off car windows, windows, mirrors, glazed flagstone and simi-
lar surfaces, even in hard to reach areas.
To attach the hood it is advisable to start at the top and
then pull the hood over the entire padding to the two
lower corners. The seam has to be on the bottom side.
For persistent dirt the mesh hood can be used, but for
normal dirt the micro fibre hood should be sufficient.
Screw the suspension eye clockwise into the end of the
handle.
Fill the spray bottle with water or desired cleaning agent (water + detergent).
Spray the cleaning agent onto the surface you intend to clean. Attention:
Please do not use excessive amounts!
Gently press the glass wizard onto the surface and move it up and down and
to the sides. When the hood is dirty, replace it with a clean hood. Please notice
that a new, unused hood can leave smear marks on a surface. This effect dis-
appears quickly after some use and cleaning.
Hints for Cleaning:
Clean the hoods after each use. Wash by hand or at 30°C in the machine, do
not use bleach of fabric softener.
Do not clean your car windows in the blazing sun.
Do not over saturate the hood and the surface with water and detergent.
Scope of Delivery: 1 x Glass Wizard, 2 x Micro-fibre Hoods, 1 x Spray Bottle
1 x Mesh Hood, 1 x Suspension Eye
Glass Wizard with Micro-fibre Hoods
Instruction Manual
Seam
