6
Operation
Before connecting the unit, consult your vehicles manual to
find out the maximum load of the cigarette lighter socket!
The unit can only be operated on a 12 V power supply and
must be protected by a 15 A fuse.
Mounting the Unit
1. First, detach the removable mounting base (3) from the unit
by sliding off to the rear.
You can stick on one side of the included hook and loop strip
the mounting base and the other part of the strip to the
desired mounting area in your vehicle. Clean the surface
before. Or you can mount the base to any flat surface with the
included screws.
2. Finally, slide the heater onto the mounting base.
Attention:
Please notice that the heater must not be in your field of
vision and select a surface, from which the mounting base
cannot be detached when driving fast around a corner. When
selecting a place for the heater, please keep in mind that the
heater must be able to aspirate enough air. Otherwise the unit
will overheat!
Make sure the power cable cannot become entangled in the
steering wheel, the pedals or any other part relevant to the
operation of the vehicle.
Operating as Heater or Fan
1. After installation connect the power plug of the heater to the
12 V cigarette lighter socket of your vehicle. When the unit is
connected, the green LED (6) will light up.
