Setting # 1
Screw not set very deep
Setting # 8
Screw set very deep
Dry Wall Construction Adaptor
Art. 25 68 75
A. For the best results use a 3/8 variable speed reversible drill.
B. To load bits, push down the nose cone all the way until the ball bearing retracts. Then
insert the bit to the into the tool holder securely.
To remove the bits reverse the procedure.
C. To adjust setting depth, push the rear collar down and set to the desired depth.
The higher the number the deeper the screws will be driven.
D. To load, push the screw into the unit until it stays in place. Than start the drill, when the
screw has reached the set depth, it will be released automatically.
1. Place the axis at bottom-by the mandrel and
press.
2 Place the screw in the front of the unit.
3. Adjust the setting depth.
