background image

 

 

 

 

 

 

 
 

 

 

3. Stellen Sie die Setztiefe ein. 

4. Arbeiten Sie mit gleichmäßigem Druck bis 
die Schraube eingedreht ist. 

5. Drücken Sie den Mittelteil zurück um 
Zugang zum Bit zu erlangen. 

6. Nehmen Sie den Bit heraus. 
 

7. Setzen Sie den neuen Bit von Hand ein. 

8.  Stellen Sie die Setztiefe ein. 

Summary of Contents for 25 68 75

Page 1: ...n Sie dann den Bit fest ins Gerät ein Der Bit wird in gleicher Weise entfernt C Um die Setztiefe der Schrauben einzustellen drücken Sie den hinteren Ring ein und stellen sie ihn auf die gewünschte Tiefe ein Je höher sie eingestellte Zahl ist desto tiefer werden die Schrauben gesetzt D Drücken Sie die Schraube von vorn ins Gerät bis sie dort einrastet Betätigen Sie dann den Schrauber Bohrer wenn di...

Page 2: ... Arbeiten Sie mit gleichmäßigem Druck bis die Schraube eingedreht ist 5 Drücken Sie den Mittelteil zurück um Zugang zum Bit zu erlangen 6 Nehmen Sie den Bit heraus 7 Setzen Sie den neuen Bit von Hand ein 8 Stellen Sie die Setztiefe ein ...

Page 3: ... the tool holder securely To remove the bits reverse the procedure C To adjust setting depth push the rear collar down and set to the desired depth The higher the number the deeper the screws will be driven D To load push the screw into the unit until it stays in place Than start the drill when the screw has reached the set depth it will be released automatically 1 Place the axis at bottom by the ...

Page 4: ...x 0180 5 30 31 30 07723 21 4 21 40 034 4 13 80 01 Internet Internet Internet www westfalia de www westfalia www westfalia versand at versand ch 4 Set out and work with constant pressure until screwing complete When the chosen depth has been reached the screw is released 5 Push back the central part to expose the tool bit 6 Extract the tool bit 7 Place the new tool bit with the fingers 8 Adjust the...

Reviews: