8
Safety Notes
Make sure the voltage corresponds to the type label on the unit.
Persons with limited physical, sensorial or mental abilities are not allowed
to use the unit, unless they are supervised and briefed for their safety by a
qualified person.
Secure the workpiece. A workpiece clamped with clamping devices or in a
vice is held more secure than by hand.
Connect machines that are used in the open via a residual current device
(RCD).
Keep your fingers away from the tool head. There is danger of injury when
unintentionally actuating the On/Off switch.
Do not use the machine to fasten electrical wiring. Contact with electric
lines can lead to fire and electric shock.
The electric stapler is designed for short-time operation. Allow the unit to
cool down sufficiently after working.
Do not modify the electric stapler. Do not point the stapler while in
operation at yourself or other persons.
If necessary wear safety equipment such as safety goggles and ear
protection.
If the unit becomes clogged, unplug first and remove the obstacle.
Do not continue using the unit if it was damaged or if it was dropped.
Protect the unit from moisture!
Do not jam the cord or pull cord around edges. Do not pinch the power cord
in any way.
Never move the unit by pulling the cord. When unplugging always grasp
the plug itself to unplug. Do not pull the cord to unplug. Do not wind the
cord around the unit and do not bend it.
The unit is designed for operation in altitudes of up to 2000 m above sea
level.
Should the unit become damaged do not use it and have it repaired by a
professional or contact our customer support department. Do not disas-
semble the unit or try repairing it yourself.
Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
