8
Using
Using
1. Press and hold down the spring clamp (2).
2. Slide the razor as far as possible horizontally into the
entry below the spring clamp.
3. Release the spring clamp
to close the system.
4. Press the power button (1)
and hold it down for
approx. 5 seconds to carry
out the sharpening
process.
5. Press down the spring
clamp to remove the shaver.
6. Rinse the razor thoroughly under running water.
7. Repeat the process, if the blades are not fully
sharpened.
Notes:
Due to technical reasons the sharpening result for
razor blades with intermediate support is expected to be
worse than sharpening continuous blades.
In case the motors jams when you press the power button,
remove the shaver and let the unit run free for a few turns.
Cleaning
Use only a soft, lit free cloth to clean the unit. Do not use
aggressive chemicals or abrasives and do not use liquids.
Do not immerse the unit in water or any other liquid.
