Dokument: 1872en02.doc
Förf.: TAn
Datum: 2010-11-16
Sida: 9 av 13
WESTERSTRAND URFABRIK AB
Box 133
Tel. 0506 48 000
Internet::
www.westerstrand.se
545 23 TÖREBODA
Fax. 0506 48 051
E-mail:
NTP >>
Enter NTP parameters.
NTP
mode
Client:
Ask ‘NTP server’ for time
DHCP:
Ask automatically via the DHCP server (DHCP option 0042)
Broadcast: Accept broadcast time messages.
A Broadcast NTP message will restart an internal timer. If no broadcast NTP
Broadcast: messages are received, then NTP request will start automatically according
to ‘Interval(s)’.
DHCP+
A Broadcast NTP message will restart an internal timer. If no broadcast NTP
Broadcast: messages are received, the unit will try to receiver NTP server IP address by
using the DHCP server option 042. I found NTP request will start
automatically according to ‘Interval(s)’.
NTP Server
Select NTP server, e.g.
192.168.1.237
or as an URL
ntp1.sp.se
. Also see DHCP server
above.
Country/Timez Select country. A NTP server sends UTC time. The clock will correct this to local time
and adjust for DST (Day-Light-Saving) automatically. A rule for DST (daylight saving
time) for each country is hard coded in the firmware. Also see DHCP server above.
Country Winter Summer
Timezone
acronym
GBR UTC+0
UTC+1 WET/WEST
CET UTC+1
UTC+2 CET/CEST
ARE
UTC+4
UTC+4
United Arab Emirates
Interval
Interval in seconds between NTP requests. (Used in
client/server mode only).
Help>>
A short help file in PDF format is displayed.
