LEONARDO PRO X
User manual
EN
9
2. INSTALLATION
The installation of the equipment must be carried out by personnel authorised and specialised to perform
this task, after adequate training for the commissioning of equipment of this type.
The installation must be carried out with the equipment not connected to the AC mains and the storage
battery bank.
2.1. Mechanical Installation
1.
Install the Leonardo PRO X in a dry and properly ventilated place, fixed on a non-flammable surface and
positioned in such a way as to leave an obstacle-free space of at least 10cm around the device that allows for
forced air convection cooling.
2.
Fix the support bracket to the wall using the dowels and screws (supplied); then hook the inverter using the
plate at the top of the unit. Lastly, secure the inverter to the wall using the holes at the bottom of the unit. All
as shown in
Pic.3.
Pic.3 - Wall mounting
Install the Leonardo in such a way as to facilitate the necessary circulation of air to cool the unit and to facilitate any
installation/maintenance operations. Leave at least 20 cm free on each side.
Pic.4 - Minimum clearance
PLATE
upper part of the inverter
BRACKET
FASTENING HOLES
lower
part of the inverter
