6-2
IPS-800CE-D16 & IPS-1600CE-D16 - User’s Guide
3.
Switching Plugs On:
Click the "On" radio button next to the desired
plug(s), then click "Apply". To switch all Plugs On, click the "On" radio
button in the "All Plugs" row, then Click "Apply."
4.
Switching Plugs Off:
Click the "Off" radio button next to the desired
plug(s), and then click "Apply". To switch all Plugs Off, click the "Off"
radio button in the "All Plugs" row, and then Click "Apply."
5.
Reboot Cycle:
Click the "Boot" radio button next to the desired plug(s),
and then click "Apply". To reboot all Plugs, click the "Boot" button in the
"All Plugs" row, and then Click "Apply."
6.
Set Plugs to Power Up Defaults:
To set plugs to their user-defined
Power-Up Default On/Off status, click the "Default" button in the
"All Circuits" row and then click "Apply." Note that in order for this
command to function, Power Up Default values for each plug must first
be defined as described in Section 5.3.3.
When each switching, default or reboot command is invoked, the IPS will
display a screen which indicates that a switching operation is in progress, then
return to the Plug Status screen when the command is complete. At that time,
the Status Screen will list the updated On/Off status of each plug.
Figure 6.1: Plug Status Menu - Web Browser Interface (IPS-800CE-D16 Shown)