6
B20352 ECN-12354 (0301)
HEADER INSTALLATION
1. Attach the left header to the union on the left side of the
manifold control unit. Using a level, mark the placement
of mounting brackets while keeping the header on a
horizontal plane.
(Figure
5)
2. Position the brackets so that the top of the
bracket is aligned with the bottom of the headers and is
centered between the cylinder connections. The brackets
should be evenly spaced with the end bracket placed as
close to the last cylinder as possible to provide the most
support and stability.
(Figure
6)
3. Mark the mounting hole and install fasteners suitable for
type of wall construction. (Figure 6)
4. Fit the U-bolt over the header piping, through the
bracket strap, and tighten the two mounting nuts. (Figure 6)
Figure 6
Figure 5
Header
Union
Header
Assembly
Spirit Level
Header
Assembly
Mounting Nut
Fastener
U-Bolt
Mounting
Bracket
Strap
NOTE:
•
Half of the brackets will be used on the left side while half will be used on the right side.
