6.
Formatting begins. After formatting the drive, press "ENTER". Boot and
operate the system normally.
If you require further information or other technical support, please contact your authorized
dealer.
Software Installation Instructions for Translation Mode
1.
Insert your system diagnostic diskette (or equivalent) in drive A.
2.
Turn on the system power.
3.
Boot diagnostic and select Setup option.
CAUTION
Avoid system damage by consulting your Technical Reference Manual to ensure that your
drive type is supported by your host BIOS ROM drive tables. Not all AT-compatibles share
the same drive tables as IBM.
4.
Set up the system for the proper configuration of diskette and fixed drives (drive
type 3 for IBM), base memory size, expansion memory size, and display.
CAUTION
The following step requires execution of low level formatting. Formatting a drive destroys
any data on the drive. If your drive contains useful data, backup the drive before execution
of the low level format. Use of Advanced Diagnostics (or similar program) is necessary
since the controllers contain no on-board BIOS ROM.
5.
After performing Setup, execute a low level format using the Advanced Diagnostics
diskette. Follow the menu and reference manual instructions.
6.
Load and execute the FDISK and FORMAT programs. Follow the menu and
reference manual instructions.
Summary of Contents for WD 1003-RA2
Page 9: ......
