MY PASSPORT STUDIO
USER MANUAL
MANAGING AND CUSTOMIZING YOUR DRIVE – 44
Showing or Hiding the Virtual CD Icon
Each
WD SmartWare
drive that you connect to your computer adds its own virtual CD
icon to your desktop display. Use the Virtual CD Settings dialog to enable (show) or
disable (hide) the virtual CD icon for your drive.
Note:
Hiding the virtual CD icon also disables password protection for your
drive. If you disable (hide) the VCD, you will not be able to create a
password to protect your drive. Or, if you have already created a
password, you will not be able to disable (hide) the VCD until you remove
password protection.
1.
On the Drive Settings screen (see Figure 12 on page 29), click
Virtual CD
to display
the Virtual CD Settings dialog:
2.
Click:
•
Enable VCD
if you want to show the virtual CD icon
•
Disable VCD
if you want to hide the virtual CD icon
3.
Click
Apply VCD Settings
to implement your selection.
4.
As prompted, for your change to take effect, you must power cycle your My Passport
drive:
a. Disconnect the USB micro cable or FireWire cable from your drive.
b. Wait ten seconds.
c. Reconnect the USB micro cable or FireWire cable to your drive.
5.
Check your desktop display to confirm the change.