ADVANCED SETTINGS
53
MY NET N900 CENTRAL ROUTER
USER MANUAL
.
Port Forwarding Screen
Port Forwarding Rules
Enabled
Select to enable the port forwarding rule. Clear the check box
to disable.
Application Name
From the drop-down list, select the application whose data you
want to forward to the client on your local network. Click the
double arrows to populate the Name, Internal Port, External
Port, and Protocol fields.
External Port Range
Enter the port(s) you want to forward from the WAN interface
(Internet). The port is automatically populated when you pick an
application from the drop-down list.
Protocol
Select the protocol that you wish to port forward. The options
are All, TCP, and UDP. The protocol will be automatically
selected if you pick an application from the drop-down list.
IP Address
Can be manually entered or populated by your selection from
the Computer Name drop-down list.
Computer Name
Device on your local network to which the rule will be applied.
Click the double arrows to populate the IP Address field.
Internal Port Range
Enter the port(s) on the LAN client to which you want to forward
data. The port is automatically populated when you pick an
application from the drop-down list.
ALG Screen
Application Level Gateway (ALG) Configuration
PPTP (Point-to-Point
Tunneling Protocol)
Turn On (default) PPTP ALG if you use a PPTP client to dial into
your corporate network via the Internet.
IPSec (VPN)
Turn On (default) IPSec ALG if you use a IPSec client to dial into
your corporate network via the Internet.
SIP (Session Initiation
Protocol)
A signaling protocol for Internet Telephony. Turn On (default) SIP
ALG if you use VoIP telephone service over your Internet
connection.
Routing Screen
Route List
Active
Select the check box to enable the routing entry.
Name
Enter a name for the routing entry.
Interface
Select the interface (WAN or LAN) for the routing entry.
Destination IP
IP address/network to which the data is sent.